AEROSOL NOZZLE
₹8,000.00
Tax excluded
- Aerosol nozzle for agriculture drone
- Voltage: 12-14S power supply
- Speed: 20,000 rpm
- Signal: PWM (1000-2000)
- power:260W
- Weight: 290g
- Length: 300mm
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Note: The nozzle is cooled by liquid medicine, and the idling time should not exceed 2 minutes, otherwise the motor is prone to jam and degaussing damage. When the 12S power supply is turned on, the speed of the nozzle is turned on at 85% (analog 1000-1850), and the service life will be extended. Try not to run at full speed. When the 14S power is supplied, the speed of the nozzle is turned on at 75%(analog 1000-1750)
Maintenance: After each operation is completed, a box of clean water must be filled, add cleaning fluid, turn on the centrifugal nozzle, spray a box of water, and idling for 1 minute. The purpose is to clean the residual pesticides to prevent corrosion, solidification and damage to the motor bearings.
59 Items
Comments (0)
No customer reviews for the moment.
10 other products in the same category:
- Specifically made for the Zenmuse X4S
- This ND filter reduces the amount of light coming into the sensor
- It give you the freedom to create your own work by allowing more control of the camera\'s aperture, exposure time and senor settings
- The ND4 filter allows 1/4 of incoming light through, equal to a 2-stop filter
2
- Balancing ring for Olympus 12mm
- Enables more stable shooting
- For zenmuse x5 gimbal camera only
- Light weight deign
5
- Obstacle Avoidance Radar for K++, KX Flight Controller
- This module is mainly used to measure the relative distance between the drone and the obstacle in front of the flight, so as to avoid the obstacle effectively
- Obstacle Avoidance Radar adopts 24GHz radar technology
20
- Mini Crossbow Mini Antenna Tracker
- Operating Voltage 7~12 V
- Compatible with HM30 Ground Unit for RC Fixed Wing and Multi Copter Drones
No product available!
- Tarot Titanium Coated Screw Driver 4in1 set
- Sizes are 1.5mm, 2.0mm, 2.5mm, 3.0mm
10
- Excellent Performance
- Reliable Quality
- Support for BEC Output
- Multiple Programmable parameters
- High Speed Throttle Response
No product available!
- EFT Obstacle Avoidance Radar Mounting Bracket
No product available!
- AI Smart identifying Tracking
- 1/1.7 inch Sony CMOS
- 4k Ultra HD Photo & Video Recording
- 6x Digital Zoom
- Starlight Night Vision Camera
No product available!
- Obstacle Avoidance Radar for K++, KX Flight Controller
- This module is mainly used to measure the relative distance between the drone and the obstacle in front of the flight, so as to avoid the obstacle effectively
- Obstacle Avoidance Radar adopts 24GHz radar technology
5
- Aerosol nozzle for agriculture drone
- Voltage: 12-14S power supply
- Speed: 20,000 rpm
- Signal: PWM (1000-2000)
- power:260W
- Weight: 290g
- Length: 300mm